Written by
Elena Navarro Appliance Repair Content SpecialistPublished September 11, 2026Updated October 20, 2026
Error codeF32
ApplianceRange
Quick answer
F32 on a legacy Dacor ER range means a loose or defective data cable between relay board and control panel, or a defective membrane.
Model compatibility: Dacor reuses codes across series and model years, so F32 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Data cable between relay board and control panel loose or defective, or defective membrane.
The Technical Manual gives F32 two possible causes on a Dacor range. The data cable between the relay board and the control panel may be loose or defective, or the membrane may be defective. It is listed for the legacy ER30D, ER36D and ER48D ranges.
Remedies in the manual
For the cable: tighten the connections, and replace it if necessary. For the membrane: replace the membrane. A technician handles both. An owner can look first at the main power switch and the control panel lock.
Related codes
F20: the same cable fault, but paired with the control panel circuit board.
F2: general fault location for communication between panel and relay board.
Service for a Dacor range in Los Angeles
If F32 stays on a Dacor range in Los Angeles, call (310) 742-1907 for Dacor range repair. Call with the code, the model number and any checks already done.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Dacor appliance?
Book a specialist visit for a clear estimate and approval before any repair.
