Written by
Elena Navarro Appliance Repair Content SpecialistPublished September 11, 2026Updated October 20, 2026
Error codeF10
ApplianceRange
Quick answer
F10 on Dacor ER30D/ER36D/ER48D ranges: a shorted element relay, or an intermittent temperature sensor or loose sensor wiring.
Model compatibility: Dacor reuses codes across series and model years, so F10 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Shorted element relay, or intermittent temperature sensor / loose sensor wiring.
F10 on a Dacor ER30D, ER36D or ER48D range has two possible causes in the service manual: a shorted element relay, or an intermittent temperature sensor or loose sensor wiring.
Cause and remedy, as listed
For the shorted relay, the remedy is to replace the power board. For the sensor, it is to tighten the sensor connections or replace the temperature sensor. Both are technician work.
What you can do first
Look at the basics the manual starts with: is the main power switch on, and is the control panel unlocked? Then book a visit.
Related codes
F30 is a shorted temperature sensor or its wiring, F31 an open sensor or wiring, and F1 the general internal code that often precedes a specific one.
Dacor range repair in Los Angeles
For a Dacor range in Los Angeles showing F10, call (310) 742-1907. We will ask for the model number and the exact code. The range repair page lists more.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Dacor appliance?
Book a specialist visit for a clear estimate and approval before any repair.
