Dacor Wall Oven U80 L80 Error Code

If your Dacor wall oven display shows U80 MEAT PROBE or L80 MEAT PROBE, the oven has found a short in the meat probe circuit. U80 refers to the upper or single oven, and L80 to the lower oven of a double.

What U80 and L80 mean

The control registered a shorted meat probe, either in the probe itself or in its socket or wiring. After 60 seconds of continuous out-of-range readings, the oven disables the meat probe. Cooking and cleaning are still available, but the meat probe options are not.

Which Dacor ovens show it

This code appears on Dacor Renaissance EOR and MOR wall ovens and on the 27-inch and 30-inch single and double ovens covered by the Dacor wall oven service manual.

What to check

1. Make sure the oven connection end of the meat probe is clean.
2. Make sure there is no food, moisture or other substance in the meat probe socket.
3. If the code stays, call for service.

What a technician checks

A technician tests the socket connection on the relay board, tries a new meat probe to compare readings, and checks the wiring for contact with sheet metal. Depending on the result, the probe or the socket is replaced.

Related codes

• U43 / L43: another relay board fault, a missing zero-cross signal.
• U70 / L70: a communication fault between the power board and the logic board.

Dacor wall oven repair in Los Angeles

If the meat probe still does not work after cleaning, our team handles Dacor wall oven repair across Los Angeles. Call (310) 742-1907 and have the U80 or L80 code, your oven model number and a note of what you already cleaned ready.

Source: Dacor Wall Oven Service Manual, Error Code Troubleshooting Guide; Dacor Renaissance Wall Oven Service Guide, Wall Oven Error Codes