Written by
Elena Navarro Appliance Repair Content SpecialistPublished September 11, 2026Updated October 20, 2026
Error codeF0 / F-0
ApplianceWall Oven
Quick answer
F0 points to a shorted or jammed input device on Dacor ovens with the ERC electronic oven control.
Model compatibility: Dacor reuses codes across series and model years, so F0 / F-0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Shorted or jammed input device (shorted wires or defective membrane switch).
F0, also shown as F-0, is the Dacor ERC failure code for a shorted or jammed input device. The Technical Manual lists shorted wires or a defective membrane switch as possible causes.
Models
An older series: Dacor ovens with the ERC electronic oven control, including CPS/CPD, ECPS/ECPD, CPTS/CPTD, PCS/PCD, MCS/MCD and ECS/ECD.
What to know
The manual gives no steps for the owner. The code concerns the keypad inputs, so a technician checks the wires and the membrane switch. In the manual’s test sequence, F-0 also appears for a stuck keypad if the tests are not finished in 30 seconds.
Related codes
F-1: the watchdog alarm, where heat is commanded with no keypad input.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Dacor appliance?
Book a specialist visit for a clear estimate and approval before any repair.
